--- title: "Pallet Racks in Woodway, TX | Waco Rack" url: https://wacopalletrack.com/service-area/woodway description: "Plan Woodway, TX mixed-height manufacturing bays with new racks matched to your loads and handling. Call (254) 275-6992." lang: en --- # Pallet Racks & Warehouse Storage in Woodway, TX We design pallet racks in Woodway around each building’s height and manufacturing transfers, matching warehouse racking to crane work, reserve loads and hand picking. Texas Central Park includes Woodway addresses around Imperial Drive, Texas Central Parkway and Gateway Boulevard, near Loop 340, US-84, SH-6 and I-35. One manufacturing plant has cranes and 29–32-foot clear height, while another building offers only 15 feet 6 inches. Similar pallets therefore need different elevations and movement plans. Compare selective reserve, cantilever stock and hand-picked shelving against each bay's usable space rather than applying a tall configuration throughout the property. (254) 275-6992: 2542756992 ## Cantilever and pallet racking outside Woodway crane paths The 97,694-square-foot Imperial Drive plant illustrates why crane work belongs on the drawing before upright locations are fixed. Record load paths, assembly staging and room to rotate long components. Cantilever may suit suitable lengthy material while selective pallet racks hold packaged components. A crane-served section needs its actual handling envelope shown alongside forklift replenishment; neither should depend on using the other's active work area. Show temporary holding positions for assemblies waiting for the next operation. An open rectangle between machines is not automatically a pallet rack location. Establish the transfer route and retrieval method for each material group, including loads that arrive or leave in a different form. Shorter rows can preserve a direct production connection that would disappear if every remaining wall length became storage. ## Warehouse racking at 15-foot-6-inch clearance The 95,000-square-foot Texas Central Parkway building demonstrates the lower end of Woodway's height range. Measure loaded pallets with wrapping and projections, then review placement clearance between levels. Check the truck's lifting ability at the intended elevation. An additional position is not useful when the load cannot enter and leave it through an ordinary forklift approach with neighboring pallets present. Group short and tall stock into elevations suited to each. Leaving every opening sized for the largest pallet can waste usable height, while close levels can be too restrictive for changing packages. Shelving can provide reachable positions for smaller hand-picked inventory alongside warehouse pallet racks. Define replenishment access and container weights so the lower-storage arrangement supports the work rather than merely filling space beneath beams. Image: Warehouse storage rack configuration for Woodway load planning (https://wacopalletrack.com/assets/pallet-rack-hero-Bx52nYZg.jpg) ## Pallet racks sized for manufacturing loads Document maximum complete weight, width, depth and entry direction by storage family. Beam capacity relates to the span and loading arrangement; upright capacity also depends on elevations. Changing one level needs a configuration review. Check the pallet's bearing points and support requirements. A general bay schedule should identify heavy or unusual loads separately instead of assuming all packages with similar footprints behave alike. For cantilever, specify lengths, bundle weights and support spacing. Verify the arms support shorter stock as well as the longest material, and consider loading on both sides where applicable. Include the loaded truck's withdrawal and turn. Open-front access removes a front-frame interruption but does not make long material fit the working space of an ordinary pallet aisle without a handling check. ## Keep future Gateway access in perspective Gateway Business Park lots in Texas Central Park are zoned M-2 light industrial and slated for future direct I-35 access through the Gateway Boulevard extension. Lake Waco Business Park and 20,000–60,000-square-foot build-to-suit space lie on Highway 6 north past Lake Waco. Use these as development context, not confirmation of a completed route or a customer's building dimensions. Current operations still need measured receiving and dispatch space. Before installation, mark row positions and establish where pallet rack deliveries and displaced stock will wait. Trial the main turns with representative loads. Confirm elevations, pallet supports and capacity information before loading finished rows. Location labels should separate crane-related stock, long material and pallet reserve where their handling differs. Retain the evaluated arrangement so later changes in beam height or inventory weight trigger review before assignment. ## Plan the next storage change For your Woodway inventory, compare pallet racks (https://wacopalletrack.com/products/pallet-rack), cantilever rack (https://wacopalletrack.com/products/cantilever-rack) against your load sizes and retrieval pattern. Temple, TX: https://wacopalletrack.com/service-area/temple Robinson, TX: https://wacopalletrack.com/service-area/robinson Hewitt, TX: https://wacopalletrack.com/service-area/hewitt Moving buildings? Our warehouse relocation service (https://wacopalletrack.com/warehouse-relocation) connects your Woodway destination layout with staging and installation. See the Waco-area town plans (https://wacopalletrack.com/service-area) when comparing Woodway storage needs with another location. ## Warehouse planning questions What size pallet rack do I need? For standard 48-inch-deep pallets in Woodway manufacturing storage, start by comparing 42-inch-deep uprights and common beam lengths: 96 inches for two 40-inch-wide pallets, 108 inches, or 144 inches for three. Measure real loaded pallets in Woodway; rack height follows clear height and forklift lift height, with placement clearance included. How are pallet rack load limits determined in Woodway? There is no single weight rating for Woodway manufacturing storage: beam capacity is per pair, per level, while frame capacity depends on height and beam spacing. We size the beams and frames from your heaviest pallet in Woodway, then put the configuration capacities on load plaques. How is a pallet rack quote priced? Pricing for Woodway manufacturing storage depends on pallet positions, height, beam capacity, decking, freight and installation. Send pallet size, heaviest load per level, clear height and building size for a free CAD layout and itemized quote for the Woodway building. ## Put your warehouse measurements to work For a Woodway rack consultation, bring pallet dimensions, loaded weights, usable height and your forklift model. (254) 275-6992: 2542756992 Call Now: 2542756992 ## Structured data ```json [ { "@context": "https://schema.org", "@type": "LocalBusiness", "@id": "https://wacopalletrack.com/#business", "name": "Waco Pallet Rack", "url": "https://wacopalletrack.com", "telephone": "(254) 275-6992", "description": "New pallet rack systems, warehouse layout planning and installation in Waco, TX.", "hasMap": "https://maps.google.com/maps?q=600%20Columbus%20Avenue%2C%20Unit%20D%2C%20Waco%2C%20TX%2076701&output=embed", "address": { "@type": "PostalAddress", "streetAddress": "600 Columbus Avenue, Unit D", "addressLocality": "Waco", "addressRegion": "TX", "postalCode": "76701", "addressCountry": "US" }, "areaServed": [ { "@type": "City", "name": "Waco, TX" }, { "@type": "City", "name": "Temple, TX" }, { "@type": "City", "name": "Robinson, TX" }, { "@type": "City", "name": "Hewitt, TX" }, { "@type": "City", "name": "Belton, TX" }, { "@type": "City", "name": "Killeen, TX" }, { "@type": "City", "name": "Bellmead, TX" }, { "@type": "City", "name": "Hillsboro, TX" }, { "@type": "City", "name": "Corsicana, TX" }, { "@type": "City", "name": "Woodway, TX" }, { "@type": "City", "name": "Lacy Lakeview, TX" }, { "@type": "City", "name": "Elm Mott, TX" }, { "@type": "City", "name": "McGregor, TX" }, { "@type": "City", "name": "Cleburne, TX" }, { "@type": "City", "name": "Copperas Cove, TX" }, { "@type": "City", "name": "Harker Heights, TX" }, { "@type": "City", "name": "Mexia, TX" }, { "@type": "City", "name": "Gatesville, TX" }, { "@type": "City", "name": "Lorena, TX" }, { "@type": "City", "name": "Marlin, TX" }, { "@type": "City", "name": "Cameron, TX" }, { "@type": "City", "name": "Rockdale, TX" }, { "@type": "City", "name": "Groesbeck, TX" }, { "@type": "City", "name": "Fairfield, TX" }, { "@type": "City", "name": "Salado, TX" } ], "openingHoursSpecification": [ { "@type": "OpeningHoursSpecification", "dayOfWeek": [ "Monday", "Tuesday", "Wednesday", "Thursday", "Friday" ], "opens": "08:00", "closes": "18:00" } ] }, { "@context": "https://schema.org", "@type": "BreadcrumbList", "@id": "https://wacopalletrack.com/service-area/woodway#breadcrumbs", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Home", "item": "https://wacopalletrack.com/" }, { "@type": "ListItem", "position": 2, "name": "Service Area", "item": "https://wacopalletrack.com/service-area" }, { "@type": "ListItem", "position": 3, "name": "Woodway", "item": "https://wacopalletrack.com/service-area/woodway" } ] }, { "@context": "https://schema.org", "@type": "FAQPage", "@id": "https://wacopalletrack.com/service-area/woodway#faq", "mainEntity": [ { "@type": "Question", "name": "What size pallet rack do I need?", "acceptedAnswer": { "@type": "Answer", "text": "For standard 48-inch-deep pallets in Woodway manufacturing storage, start by comparing 42-inch-deep uprights and common beam lengths: 96 inches for two 40-inch-wide pallets, 108 inches, or 144 inches for three. Measure real loaded pallets in Woodway; rack height follows clear height and forklift lift height, with placement clearance included." } }, { "@type": "Question", "name": "How are pallet rack load limits determined in Woodway?", "acceptedAnswer": { "@type": "Answer", "text": "There is no single weight rating for Woodway manufacturing storage: beam capacity is per pair, per level, while frame capacity depends on height and beam spacing. We size the beams and frames from your heaviest pallet in Woodway, then put the configuration capacities on load plaques." } }, { "@type": "Question", "name": "How is a pallet rack quote priced?", "acceptedAnswer": { "@type": "Answer", "text": "Pricing for Woodway manufacturing storage depends on pallet positions, height, beam capacity, decking, freight and installation. Send pallet size, heaviest load per level, clear height and building size for a free CAD layout and itemized quote for the Woodway building." } } ] } ] ```